:focal(2087x741:2088x742))
:focal(1743x771:1744x772))
:focal(2030x752:2031x753))
:focal(2016x687:2017x688))
)
:focal(1976x799:1977x800))
:focal(2178x616:2179x617))
:focal(1769x919:1770x920))
:focal(1794x960:1795x961))
:focal(1688x825:1689x826))
:focal(2211x774:2212x775))
:focal(2197x762:2198x763))
:focal(2012x887:2013x888))
:focal(2042x677:2043x678))
:focal(1964x703:1965x704))
:focal(2004x771:2005x772))
:focal(2129x802:2130x803))
:focal(1842x717:1843x718))
:focal(2252x541:2253x542))
:focal(2028x656:2029x657))
:focal(2216x805:2217x806))
:focal(1757x521:1758x522))
:focal(1995x840:1996x841))
:focal(1426x934:1427x935))
:focal(2162x651:2163x652))
:focal(1922x670:1923x671))
:focal(2171x571:2172x572))
:focal(1493x511:1494x512))
:focal(2073x622:2074x623) "Headerimage for Smart Device Care Service Portal")
:focal(1908x623:1909x624))
:focal(1797x799:1798x800))
:focal(1029x706:1030x707))
:focal(1889x1023:1890x1024))
:focal(1973x660:1974x661))
:focal(1897x1028:1898x1029))
:focal(1899x1038:1900x1039))
:focal(1895x1017:1896x1018))
:focal(924x891:925x892))
:focal(2030x451:2031x452))
:focal(2098x769:2099x770))
:focal(2026x319:2027x320))
:focal(1743x810:1744x811))
:focal(1397x785:1398x786))
:focal(2044x818:2045x819))
:focal(1842x700:1843x701))
Product details
rely on cross-station logic. Best operating safety with maximum temperature accuracy.
All stations are bidirectionally connected. This means that the entire system can be set via a control panel and all important information can be called up centrally. The controller is able to issue a group fault signal and can therefore be used for building management systems. Cascades offer the option of adding the outputs of several stations. Stations are combined to achieve the required performance.
The advantage over large mains water stations is that the hot water volume flows are regulated more precisely by several individual stations. The next station is only switched on when a switch-on threshold is reached.
Reflex mains water stations are used exclusively for heating potable water by means of a buffer tank and an internal plate heat exchanger using the flow-through principle. Only potable water as defined by the Potable Water Ordinance may be heated.Downloads
Documents
Drawings
Product photos
Accessories
9583553 - Reflex Hydroflow Circulation unit S / M
pre-assembled unit for maintaining the temperature at every point in the hot water system. Circulation set with high-efficiency pump.
Can be used for Reflex Hydroflow S and M, both for cascades and individual stations. Comprising 2 shut-off ball valves, gravity brake and PT1000 temperature sensor.
9583551 - Reflex Hydroflow Ball valve set individual station XS / S / M
comprising three ball valves for wall mounting of the station or if no Reflex Storaflow pipe connection set has been ordered.
DN 20 ball valves for heating side flow/return Rp 3/4" - 1" male thread and hot water RP 3/4" - union not 1” thread.
9583552 - Reflex Hydroflow cascade station Ball valve set cascade M
for connection of the cascade pipework to the Reflex mains water station Hydroflow S or M.
Buffer tank flow/return angle ball valves. Hot water cascade valve including motor ball valve.
9583554 - Reflex Hydroflow 2-fold Cascade piping M
for the hydraulic connection of 2 Reflex Hydroflow stations to create a cascade. The item is required 2x for a 4-way cascade and must each be connected via a T piece, for example.
9583555 - Reflex Hydroflow Return flow stratification M
3-zone valve DN32 with two PT1000 sensors for return stratification.
Suitable for Reflex Hydroflow as a single station or as a cascade in conjunction with conventional buffer tanks without a stratified charging pipe. The set is not required when using a Reflex Storaflow hot water storage tank, as this has a stratified charging pipe and stratified separating plate.
Contact the Reflex Team and further information
Reflex Solutions Pro
- Free to use
- Simple and self-explanatory
- Detailed documentation
:focal(1994x788:1995x789))
Reflex Solutions Pro allows you to design every Reflex and Sinus product into your project quickly and easily. After entering a few system parameters you will receive your custom product solution with all the relevant documentation.