:focal(2087x741:2088x742))
:focal(1743x771:1744x772))
:focal(2030x752:2031x753))
:focal(2016x687:2017x688))
)
:focal(1976x799:1977x800))
:focal(2178x616:2179x617))
:focal(1769x919:1770x920))
:focal(1794x960:1795x961))
:focal(1688x825:1689x826))
:focal(2211x774:2212x775))
:focal(2197x762:2198x763))
:focal(2012x887:2013x888))
:focal(2042x677:2043x678))
:focal(1964x703:1965x704))
:focal(2004x771:2005x772))
:focal(2129x802:2130x803))
:focal(1842x717:1843x718))
:focal(2252x541:2253x542))
:focal(2028x656:2029x657))
:focal(2216x805:2217x806))
:focal(1757x521:1758x522))
:focal(1995x840:1996x841))
:focal(1426x934:1427x935))
:focal(2162x651:2163x652))
:focal(1922x670:1923x671))
:focal(2171x571:2172x572))
:focal(1493x511:1494x512))
:focal(2073x622:2074x623) "Headerimage for Smart Device Care Service Portal")
:focal(1908x623:1909x624))
:focal(1797x799:1798x800))
:focal(1029x706:1030x707))
:focal(1889x1023:1890x1024))
:focal(1973x660:1974x661))
:focal(1897x1028:1898x1029))
:focal(1899x1038:1900x1039))
:focal(1895x1017:1896x1018))
:focal(924x891:925x892))
:focal(2030x451:2031x452))
:focal(2098x769:2099x770))
:focal(2026x319:2027x320))
:focal(1743x810:1744x811))
:focal(1397x785:1398x786))
:focal(2044x818:2045x819))
:focal(1842x700:1843x701))
Product details
Fully assembled and wired fresh water station with electronic control, ready for use for the hygienic heating of drinking water. Equipped with a plate heat exchanger (non-ferrous metal-free) with a perfectly matched thermal length for low return temperatures, which works according to the counterflow principle.
Can be shut-off on the potable water side and is equipped with an integrated 10 bar safety valve. Can be shut off on the heating side. Potable water side pipework made of stainless steel, heating side made of copper. Fittings made of brass.
Downloads
Documents
Drawings
Product photos
Accessories
9583556 - Reflex Hydroflow Circulation unit L/XL
pre-assembled unit for maintaining the temperature at every point in the hot water system. Circulation set with high-efficiency pump.
Can be used for Reflex Hydroflow L and XL. For installation in the station. Comprising a shut-off ball valve, gravity brake, thermometer and PT1000 temperature sensor.
9583557 - Reflex Hydroflow Cascade ball valve L
for switching individual stations off or on as required, including actuator.
9583558 - Reflex Hydroflow 2-fold Cascade piping L
for the hydraulic connection of 2 Reflex Hydroflow stations to create a cascade. The item is required 2x for a 4-way cascade and must each be connected via a T piece, for example.
9583559 - Reflex Hydroflow Return flow stratification L/XL
2-zone valve DN32 with two PT1000 sensors and electrical connection box for return stratification.
Suitable for Reflex Hydroflow as a single station or as a cascade in conjunction with conventional buffer tanks without a stratified charging pipe. The set is not required when using a Reflex Storaflow hot water storage tank, as this has a stratified charging pipe and stratified separating plate.
9583608 - Reflex Hydroflow BMS module
Extension module for the MFWC+ to signal a collective fault message to an external building management system (BMS) via a potential free contact.
Consisting of:
- IP54 protective housing
- Switching relay with changeover contact
- Coil control voltage: 9–12 VDC
Contact the Reflex Team and further information
Reflex Solutions Pro
- Free to use
- Simple and self-explanatory
- Detailed documentation
:focal(1994x788:1995x789))
Reflex Solutions Pro allows you to design every Reflex and Sinus product into your project quickly and easily. After entering a few system parameters you will receive your custom product solution with all the relevant documentation.